The roller set with anti-sticking rubber roller and roller frame is used in heavy bulk conveyors|GCS
lmpact rollers are used and positioned corresponding to the load points, where the lumps and the weight of material fling onto the belt could in fact cause damage to it. To limit the impact effect of the material onto the rollers, the atter is covered with a series of rubber rings of adequate thickness and resistance.
Material Iron
Application Chemical Industry| Grain Transportation|Mining Transport|
Power Plant|Structure
Ordinary Roller|Bearing Type|Double Sealed Bearing
Type: Impact Idler
Product Name: Impact Idler Roller
Usage: Conveyor Belt System
Diameter:50-219 mm
Surface Preparation: Spray Paint
Color: Requirements
Certification: ISO 9001:2015
Trademark: GCS
HS Code:8431390000
| Code No. | A | B | 20° | 30° | 35° | 45° | Base Angle Size | Shaft Dia. | Trough Mass | Total | Shaft Dia. | Impact Mass R.P. | Total Mass | ||||
| C | D | C | D | C | D | C | D | R.P. | Mass | ||||||||
| XX-A1-3-C2A2-0750-YY | 278 | 1000 | 105 | 860 | 145 | 828 | 165 | 794 | 196 | 710 | 75 | 27 | 11.0 | 29.1 | 27 | 13.5 | 34.6 |
| XX-A1-3-C2A2-0800-YY | 294 | 1050 | 105 | 914 | 160 | 870 | 180 | 830 | 208 | 752 | 75 | 27 | 11.7 | 30.1 | 27 | 14.1 | 36.0 |
| XX-A1-3-C2A2-0900-YY | 331 | 1150 | 118 | 1020 | 177 | 972 | 198 | 934 | 238 | 834 | 75 | 27 | 12.5 | 32.1 | 27 | 15.3 | 38.7 |
| XX-A1-3-C2A2-1000-YY | 358 | 1250 | 128 | 1096 | 190 | 1048 | 217 | 1000 | 259 | 898 | 75 | 27 | 13.3 | 34.1 | 27 | 16.5 | 41.5 |
| XX-A1-3-C2A2-1050-YY | 383 | 1300 | 143 | 1166 | 206 | 1114 | 228 | 1070 | 273 | 962 | 75 | 27 | 14.0 | 35.6 | 27 | 17.6 | 43.6 |
| XX-A1-3-C2A2-1200-YY | 436 | 1450 | 158 | 1318 | 226 | 1262 | 262 | 1240 | 314 | 1084 | 75 | 27 | 15.5 | 39.3 | 27 | 20.0 | 48.9 |
| XX-A1-3-D2A3-1350-YY | 488 | 1650 | 178 | 1466 | 257 | 1402 | 285 | 1350 | 349 | 1212 | 90 | 30 | 17.1 | 46.6 | 30 | 22.3 | 58.2 |
| XX-A1-3-D2A3-1400-YY | 494 | 1700 | 178 | 1488 | 257 | 1424 | 297 | 1354 | 349 | 1240 | 90 | 30 | 17.2 | 47.5 | 30 | 22.6 | 59.2 |
| XX-A1-3-E2A3-1500-YY | 541 | 1800 | 193 | 1622 | 289 | 1540 | 318 | 1486 | 392 | 1328 | 100 | 30 | 18.6 | 57.4 | 30 | 24.7 | 71.6 |
| XX-A1-3-E2A5-1600-YY | 561 | 2000 | 193 | 1684 | 289 | 1602 | 336 | 1530 | 392 | 1406 | 100 | 33 | 19.2 | 62.5 | 33 | 25.6 | 77.6 |
Note: XX-inputfor: RS or HRS.
YY-Inputforangle: 20° ,30° ,35° ,45°
Base angle size nominated is normal stock standard. Dimensions E and F do not vary with change in base angle size as tabulated below.
Code numbers shown are for plain trough idlers, for impact idlers change both" A's" in code numbers to '' B's
| Code No. | A | B | 20° | 30° | 35° | 45° | Base Angle Size | Shaft Total | Trough Mass | Total | Shaft Dia. | Impact Mass R.P. | Total Mass | ||||
| C | D | C | D | C | D | C | D | Dia. | R.P. | Mass | |||||||
| XX-A1-3-C2A2-1000-YY | 359 | 1250 | 128 | 1096 | 190 | 1048 | 217 | 1000 | 259 | 898 | 75 | 27 | 15.0 | 36.2 | 27 | 16.5 | 41.9 |
| XX-A1-3-C2A2-1050-YY | 384 | 1300 | 143 | 1166 | 206 | 1114 | 228 | 1070 | 273 | 962 | 75 | 27 | 15.8 | 37.6 | 27 | 17.6 | 43.8 |
| XX-A1-3-D2A2-1200-YY | 437 | 1450 | 158 | 1318 | 226 | 1262 | 262 | 1240 | 314 | 1084 | 90 | 27 | 17.3 | 43.3 | 27 | 20.0 | 51.6 |
| XX-A1-3-D2A3-1350-YY | 489 | 1650 | 178 | 1466 | 257 | 1402 | 285 | 1350 | 349 | 1212 | 90 | 30 | 18.8 | 48.7 | 30 | 22.3 | 58.6 |
| XX-A1-3-D2A3-1400-YY | 496 | 1700 | 178 | 1488 | 257 | 1424 | 297 | 1354 | 349 | 1240 | 90 | 30 | 19.0 | 49.5 | 30 | 22.6 | 59.7 |
| XX-A1-3-E2A3-1500-YY | 542 | 1800 | 193 | 1622 | 289 | 1540 | 318 | 1486 | 392 | 1328 | 100 | 30 | 20.4 | 59.4 | 30 | 24.7 | 71.8 |
| XX-A1-3-F2A5-1600-YY | 562 | 2000 | 193 | 1684 | 289 | 1602 | 336 | 1530 | 392 | 1406 | 125 | 33 | 21.0 | 71.5 | 33 | 25.6 | 87.4 |
| XX-A1-3-F2A5-1800-YY | 626 | 2200 | 223 | 1860 | 325 | 1770 | 371 | 1700 | 439 | 1560 | 125 | 33 | 22.8 | 78.1 | 33 | 28.5 | 96.5 |
Note: XX-inputfor: RS or HRS.
YY-Input for angle： 20°, 30° ,35° ,45°
Base angle size nominated is normal stock standard.Dimensions E and F do not vary with change in base angle size as tabulated below.
Code numbers shown are for plain trough idlers,for impact idlers change both" A'sn in code numbers to '' B*s
| Base Angle | E | F |
| 75X75X6 | 165 | 222 |
| 90X90X7 | 180 | 232 |
| 100X100X8 | 200 | 240 |
| 125X125X8 | 240 | 260 |
| 140X140X12 | 280 | 279 |
We are partners of our customers from first contact to after-sales service. As a technical consultant, we discuss the requirements with our customers and develop solutions that increase the efficiency and added-value. Along the entire - ISO 9001 certified process chain - we offer the most attractive solution package.
GCS reserves the right to change dimensions and critical data at any time without any notice. Customers must ensure that they receive certified drawings from GCS prior to finalizing design details.
Tell Us Your Requirement About Trough Idler .Contact us Now!