UHMWPE | Polyethy lene Roller

UHMWPE idler roller HDPE trough carrier conveyor roller |GCS conveyor roller factory

FEATURE

1. Extremely high wear resistance, super low friction coefficient, super strong anti-adhesion ability, can prolong belt service time by 1-times

2. No worry about maintenance during service time

3. Fire resistance, antistatic, bear aging, anti-corrosion of various chemical media

4. Super strong mechanical strength can stand repeated impact and vibration

5. Superior sealing property, low noise, low rotation resistance, steady operation, and long service life, which is 2-3 times of traditional roller

6. Work in -40℃ to 80 ℃ for a long time

7. Light weight, easy installation

Description

UHMW-PE Roller is short for ultra-high molecular weight polyethylene. HDPE is short for high-density polyethylene. UHMWPE/HDPE Roller is a linear polyethylene with a molecular weight of more than 3 million roller

The effectiveness of the HDPE roller system provides the solution to the environmental challenges of dust, dirt, water, low and high temperatures, or applications with a large temperature gap between day and night.

A typical application for the conveyor idler rollers is mines, quarries, cement plants, coal-fired power plants, and port installations. The effectiveness of the HDPE roller system provides the solution to the environmental challenges of dust, dirt, water, low and high temperatures, or applications with a large temperature gap between day and night. The working temperature, with standard greased components, is defined as between -100°C and + 80°C. It is possible to reach temperatures outside of this range using special grease, bearings, and seals.

HDPE roller idlers for self-cleaning are used on the transom to support the belt when the material is being conveyed, perform a cleaning action, and reduce the tendency of a material to deposit itself and stick to the surface of the dirty side of the belt. They may be employed on any part of the return belt section in the case of short conveyors. On long sections, it is satisfactory to employ these rollers only up to the point where the material does not adhere anymore to the belt surface. These rollers should not be employed as snub rollers adjacent to the drive or return drums.

Characteristics of conveying roller

1. High-wear resistance is seven times the wear resistance of steel and four times that of PTFE.

2. High impact resistance two times impact resistance than PC, five times than ABS.

3. Self-lubrication is the same as PTFE, better than steel and brass appended lubricating oil.

4. Anti-corrosion resistance, stable chemicals property and can endure the corrosion of all kinds of corrosive medium and organic solvent in certain rang of temperature and humidity.

5. Non-sticking the smooth surface of the product hardly affixes other material.

6. Low-temperature resistance in (-196), it still has the prolongation and high tensile strength.

7. Non-toxic and clean property.

Common specification parameters of UHMW-PE Roller

UHMWPE Roller Specification

UHMWPE/Polyethylene Roller

GCS roller chain conveyor manufacturers reserves the right to change dimensions and critical data at any time without any notice. Customers must ensure that they receive certified drawings from GCS prior to finalizing design details.

You may need these before your order

Impact idler rollers

Belt conveyor idler suppliers steel garland roller (6 roll)

Rubber Lagged Drum Pulley by GCS

Recommend Reading

Belt Conveyor Idlers – GCS conveyor roller idler manufacturers

List of common metal materials and properties

GCS belt conveyor types and application principle